Jump to the main content block

Y2013

  1. Chuan Li, J.H. Hsieh, K.L. Huang, Yu Ting Shao, Yi Wen Chen,“Effects of H2 and Ar flow rates on the deposition of hydrogenated silicon thin films by an inductive coupled plasma-chemical vapor deposition system”, Thin Solid Films, (2013) http://dx.doi.org/10.1016/j.tsf.2013.05.009.
  2. J.H. Hsieh, T.H. Yeh, C. Li, C.H. Chiu, C.T. Huang,“Antibacterial properties of TaNe(Ag,Cu) nanocomposite thin films”, Vacuum, 87 (2013) 160-163.
  3. J.H. Hsieh, T.H. Yeh, S.Y. Chang, C. Li, C.C. Tseng, W. Wu, “Mechanical and antibacterial behaviors of TaN–Cu nanocomposite thin films after multi-rejuvenation”, Surface & Coatings Technology, (2012) http://dx.doi.org/10.1016/j.surfcoat.2012.08.022.
  4. J.H. Hsieh, T.H. Yeh, C. Li, S.Y. Chang, C.H. Chiu, C.T. Huang,“Mechanical properties and antibacterial behaviors of TaN–(Ag,Cu) nanocomposite thin films after annealing“, Surface & Coatings Technology, (2012) doi:10.1016/j.surfcoat.2012.07.022.
  5. J.H. Hsieh, Chuan Li, S.J. Liu, W.S. Lin,“Sputtering process parameters to structural and electrical properties of indium zinc oxide thin films”, Surface & Coatings Technology,(2012) doi:10.1016/j.surfcoat.2012.04.080.
  6. Chuan Li, J.H. Hsieh, S.J. Liu, W.S. Lin,“Electrical and structural study on indium zinc oxide thin films by sputtering process”, Surface & Coatings Technology,(2012) doi:10.1016/j.surfcoat.2012.04.084.
  7. J.H. Hsieh, H.C. Liang, Y. Setsuhara, C. Li,“Deposition and characterization of a- and μc-Si:H thin films by ICP-CVD system with internal antennas”, Surface & Coatings Technology,(2012) doi:10.1016/j.surfcoat.2012.03.007.
  8. Jyh-Wei Lee, C.-H. Cheng, J.-G. Duh, H.-W. Chen, Y.-C. Chan,"The influence of boron contents on the microstructure and mechanical properties of Cr-B-N thin films", Vacuum, 87 (2013) 191-194.
  9. Yu-Chen Chan, Hsien-Wei Chen, Pen-Shen Chao, Jenq-Gong Duh, Jyh-Wei Lee, "Microstructure control in TiAlN/SiNx multilayers with appropriate thickness ratios for improvement of hardness and anti-corrosion characteristics", Vacuum, 87 (2013) 195-199.
  10. Yu Xi Wang, Sam Zhang, Jyh-Wei Lee, Wen Siang Lew, Bo Li,"Toughening effect of Ni on nc-CrAlN/a-SiNx hard nanocomposite", Applied Surface Science, 265 (2013) 418-423.
  11. Chau-Chang Chou, Yi-Yang Wu, Jyh-Wei Lee, Jen-Ching Huang, Chi-Hsiao Yeh, "Mechanical properties of fluorinated DLC and Si interlayer on a Ti biomedical alloy", Thin Solid Films, 528 (2013) 136–142.
  12. Ching-Yen Chuang, Jyh-Wei Lee, Chia-Lin Li, Jinn P. Chu,"Mechanical properties study of a magnetron-sputtered Zr-based thin film metallic glass", Surface and Coatings Technology, 215 (2013) 312–321.
  13. Ching-Yen Chung, Yi-Chia Liao, Jyh-Wei Lee, Chia-Lin Li, Jinn P. Chu, Jenq-Gong Duh,"Electrochemical characterization of Zr-based thin film metallic glass in hydrochloric aqueous solution", Thin Solid Films, 529 (2013) 338-341.
  14. Chil-Chyuan Kuo, Yi-Ruei Chen, Cheng-Yi Tong, Jyh-Wei Lee,"A low-cost optical inspection system for rapid surface roughness measurements of CrCN hard films", Optik , 124 (2013) 1902-1906.
  15. Yuexiu Qiu, Sam Zhang, Jyh-Wei Lee, Bo Li, Yuxi Wang, Dongliang Zhao "Self-lubricating CrAlN/VN multilayer coatings at room temperature", Applied Surface Science, 279 (2013) 189-196.
  16. Chau-Chang Chou, Yi-Yang Wu, Jyh-Wei Lee, Chi-Hsiao Yeh, Jen-Ching Huang, "Characterization and haemocompatibility of fluorinated DLC and Si interlayer on Ti6Al4V", Surface and Coatings Technology, (2012) doi:10.1016/j.surfcoat.2012.01.020.
  17. Cheng-Yi Tong, Jyh-Wei Lee, Chil-Chyuan Kuo, Sung-Hsiu Huang, Yu-Chen Chan, Hsien-Wei Chen, Jenq-Gong Duh, 2013,"Effects of carbon content on the microstructure and mechanical property of cathodic arc evaporation deposited CrCN thin films", Surface and Coatings Technology, (2012) doi:10.1016/j.surfcoat.2012.01.009.
  18. Pao-Sheng Chen, Hsien-Wei Chen, Jenq-Gong Duh, Jyh-Wei Lee, Jason Shian-Ching Jang,"Characterization of mechanical properties and adhesion of Ta–Zr–Cu–Al–Ag thin film metallic glasses", Surface and Coatings Technology, (2012) doi:10.1016/j.surfcoat.2012.03.087.
  19. Siao-Fan Chen, Yu-Chu Kuo, Chaur-Jeng Wang, Sung-Hsiu Huang, Jyh-Wei Lee, Yu-Chen Chan, Hsien-Wei Chen, Jenq-Gong Duh, Tsung-Eong Hsieh,"The effect of Cr/Zr chemical composition ratios on the mechanical properties of CrN/ZrN multilayered coatings deposited by cathodic arc deposition system", Surface and Coatings Technology, (2012) doi:10.1016/j.surfcoat.2012.03.002.
  20. Yuexiu Qiu, Sam Zhang, Bo Li, Yuxi Wang, Jyh-Wei Lee, Fengji Li, Dongliang Zhao, "Improvement of tribological performance of CrN coating via multilayering with VN", Surface and Coatings Technology, (2012) doi:10.1016/j.surfcoat.2012.03.010.
  21. Yu Xi Wang, Sam Zhang, Jyh-Wei Lee, Wen Siang Lew, Deen Sun, Bo Li, "Toward Hard yet Tough CrAlSiN Coatings via Compositional Grading", Surface and Coatings Technology, (2012) doi:10.1016/j.surfcoat.2012.03.036.
  22. Pi-Chuen Tsai, Chun-Feng Tseng, Chung-Wei Yang, Iang-Chuen Kuo, Yia-Ling Chou, Jyh-Wei Lee,"Thermal cyclic oxidation performance of plasma sprayed zirconia thermal barrier coatings with modified high velocity oxygen fuel sprayed bond coatings", Surface and Coatings Technology, (2012) http://dx.doi.org/10.1016/j.surfcoat.2012.10.004
  23. Yu-Chen Chan, Hsien-Wei Chen, Yan-Zuo Tsai, Jenq-Gong Duh, Jyh-Wei Lee, "Texture, microstructure and anti-wear characteristics in isostructural CrAlSiN/W2N multilayer coatings", Thin Solid Films, (2013) http://dx.doi.org/10.1016/j.tsf.2013.03.106
  24. Li-Wei Ho, Jyh-Wei Lee, Hsien-Wei Chen, Yu-Chen Chan, Jenq-Gong Duh, "Structure and mechanical property evaluation of Cr–Ti–B–N coatings", Thin Solid Films, (2013) http://dx.doi.org/10.1016/j.tsf.2013.02.095.
  25. Yu-Chen Chan, Hsien-Wei Chen, Jenq-Gong Duh, Jyh-Wei Lee,"Texture, Microstructure, and Tribological Behavior in TiAlN/SiNx Multilayers", International Journal of Applied Ceramic Technology, (DOI: 10.1111/ijac.12060)
  26. Yang-Yen Yu, Si-Han Chan,“Metallic nanoparticles in active layer for hybrid photovoltaic device applications”, Thin Solid Films ,(2013) doi.10.1016/j.tsf.2013.03.128.
  27. Yang-Yen Yu, Chia-Liang Tsai ,”An approach to hybrid inorganic nanoparticles in reactive PS-b-PMSMA amphiphilic copolymers”, Current Applied Physics, 13 (2013) 1128-1136.
  28. Yang-Yen Yu, Chung-Yi Hsu, Guo-You Li,“Synthesis and Morphological Transformation of Conjugated Amphiphilic Diblock Copolymers in Mixed Solvents”, Journal of Nanomaterials, Volume 2013 (2013), Article ID 498920, 12 pages.
  29. Yang-Yen Yu, Hui-Huan Yu,High refractive index organic–inorganic composites with TiO2 nanocrystal”, Thin Solid Films, 529 (2013) 195-199.
  30. Yang-Yen Yu, Chi-Yi Ciou,“Hybrid solar cells based on colloidal nanocrystals and conjugated polymers”, Thin Solid Films, (2013) doi.10.1016/j.tsf.2013.03.084.
  31. Yang-Yen Yu, Po-Kan Chen,“Nanocomposites of polymer and inorganic nanoparticles prepared by focused microwave polymerization for optical thin films applications”, Thin Solid Films, (2013) doi.10.1016/j.tsf.2013.03.140.
  32. Yang-Yen Yu, Si-Han Chan, ”Effects of metal oxide as an anode interlayer for organic photovoltaics”, Thin Solid Films, (2013) doi.10.1016/j.tsf.2013.05.041.
  33. Yang-Yen Yu, Yu-Cyuan Rao, Chao-Ching Chang,“Preparation and characterization of highly transparent epoxy/inorganic nanoparticles hybrid thin films”, Thin Solid Films, (2013) doi.10.1016/j.tsf.2013.05.038.
  34. J.S. Cherng , S.H. Chang , S.H. Hong ,“Nanocrystalline silicon films directly made by pulsed-DC magnetron sputter”, Surface & Coatings Technology, (2012) http://dx.doi.org/10.1016/j.surfcoat.2012.08.057.
  35. J.S. Cherng, C.C.Wu, W.H.Chen, T.H.Yeh,“Microstructure and performance of micro-tubular solid oxide fuel cells made by aqueous electrophoretic deposition”, Ceramics International, 39 (2013) S601–S604.
  36. Tsung-Her Yeh , Ruei-De Lin , Jyh-Shiarn Cherng,“Significantly enhanced ionic conductivity of yttria-stabilized zirconia polycrystalline nano-film by thermal annealing”, Thin Solid Films, (2013), http://dx.doi.org/10.1016/j.tsf.2013.03.134.
  37. J.S. Cherng , C.C. Wu , F.A. Yua, T.H. Yeh ,“Anode morphology and performance of micro-tubular solid oxide fuel cells made by aqueous electrophoretic deposition”, Journal of Power Sources, 232 (2013) 353-356.
  38. S.C. Chen, C. D. Chen, T. H. Sun, S. L. Ou, C. L. Shen, and W. H. Su,“Effect of Pt content on structure and magnetic properties of Fe100−xPtx films deposited on thermally oxidized Si substrates by rapid thermal annealing” , Vacuum, 87 (2013) 205-208.
  39. T. H. Sun, S. C. Chen, W. H. Su, and J. R. Chen, “Microstructures and magnetic properties of L10 FePt films deposited on NaCl-type films”, Thin Solid Films, (2013) http://dx.doi.org/10.1016/j.tsf.2013.01.038.
  40. P.C. Juan , C.H. Liu , C.L. Lin , F.C. Mong , J.H. Huang ,“The effect of ZrN antidiffusion capping layer on the electrical and physical properties of metal-gate/ZrN/Zr-graded Dy2O3/Si MIS nanolaminated structures”, Microelectronic Engineering, 109 (2013) 172–176.
  41. P.C. Juan , C.L. Sun , C.H. Liu , C.L. Lin , F.C. Mong , J.H. Huang , H.S. Chang ,“Effects of zirconium substitution on the electrical and physical properties of metal-ferroelectric (BiFeO3)-insulator (HfO2)-silicon structures for non-volatile memories” Microelectronic Engineering, 109 (2013) 142–147.
  42. Pi-chun Juan , Cheng-li Lin , Chuan-hsi Liu , Chun-heng Chen , Yin-ku Chang , Ling-yen Yeh ,“Temperature-dependent current conduction of metal-ferroelectric (BiFeO3)-insulator (ZrO2)-Silicon capacitors for nonvolatile memory applications” , Thin Solid Films, (2013) http://dx.doi.org/10.1016/j.tsf.2013.05.087.
  43. Hsuan-ling Kao, Cheng-Lin Cho, Li-Chun Chang, Chih-Sheng Yeh, Bo-Wen Wang, and Hsien-Chin Chiu, “Inkjet printing RF bandpass filters on liquid crystal polymer substrates” , Thin Solid Films, (2013)http://dx.doi.org/10.1016/j.tsf.2013.04.125.
  44. Chih-Ting Lin, Jer-Chyi Wang, Po-Wei Huang, Yu-Yen Chen, and Li-Chun Chang, “Performance Revelation and Optimization of Gold Nanocrystal for Future Nonvolatile Memory Application”, Japanese Journal of Applied Physics, 52 (2013) 04CJ09.
  45. Jer-Chyi Wang, Chih-Ting Lin, Po-Wei Huang, Chao-Sung Lai, Li-Chun Chang, Chih-I Wu, and Jung-Hung Chang, “Hybrid polarity and carrier injection of gold and gadolinium oxide binanocrystals structure”, Applied Physics Letters, 102 (2013) 083507.
  46. Hsuan-Ling Kao, Chih-Sheng Yeh, Meng-Ting Chen, Hsien-Chin Chiu, and Li-Chun Chang, “Characteristics and Reliabilities on the Dicing before Grinding (DBG) Process in nMOSFETs”, Solid State Electronics, 79 (2013) 111-116.
  47. Li-Hsueh Chang , Chien-Kuo Hsieh , Min-Chien Hsiao , Jen-Chi Chiang , Po-I. Liu , Kuan-Ku Ho , Chen-Chi M. Ma , Ming-Yu Yen , Ming-Chi Tsai , Chuen-Horng Tsai ,“A graphene-multi-walled carbon nanotube hybrid supported on fluorinated tin oxide as a counter electrode of dye-sensitized solar cells” , Journal of Power Sources, 222 (2013) 518-525.
  48. Sung-Yen Wei, Hung-Hsi Lin,Sheng-Min Yu, Chien-Kuo Hsieh, Shuo-Cheng Tsai,Wen-Ching Sun,Tzer-Shen Lin,Chuen-Horng Tsai and Fu-Rong Chen,“Epitaxial growth of heavily boron-doped Si by Al(B)-induced crystallisation at low temperature for back surface field manufacturing”, CrystEngComm , 15 (2013) 1680.
  49. Min-Chien Hsiao, Chen-Chi M. Ma, Jen-Chi Chiang, Kuan-Ku Ho, Tsung-Yu Chou, Xiaofeng Xie, Cheng-Hsun Tsai, Li-Hsueh Chang and Chien-Kuo Hsieh, “Thermally conductive and electrically insulating epoxy nanocomposites with thermally reduced grapheme oxide–silica hybrid nanosheets” , Nanoscale,(2013) DOI: 10.1039/c3nr01471a.
  50. Chih-Ping Chen, Yi-Chun Chenb and Chao-Ying Yu,“Increased open circuit voltage in a fluorinated quinoxaline-based alternating conjugated polymer”, Polym. Chem., 4 (2013) 1161.
  51. Yi-Ming Chang , Chih-PingChen , Jau-MinDing , Chi-YiLeu , Mei-JuLee , Ru-DeChen ,“Top-illuminated organic solar cells fabricated by vacuum-free and all-solution processes” , Solar Energy Materials & Solar Cells, 109 (2013) 91–96.
  52. Chuang-Yi Liao , Chih-PingChen , Ching-ChihChang , Gue-WuuHwang , Ho-Hsiu Chou , Chien-HongCheng ,“Synthesis of conjugated polymers bearing indacenodithiophene and cyclometalated platinum(II) units and their application in organic photovoltaics” , Solar Energy Materials & Solar Cells, 109 (2013) 111–119.
  53. Wang, H.-J., Chou C.-W.,  Chen, Chih-Ping , Chen,Y.-H.,  Lee, R.-H. and  Jeng, R.-J., Journal of Material Chemistry A, (2013) DOI:10.1039/C3TA11272A. Just accepted(SCI new Journal)
  54. Hsuan-Chung Wu, Yen-Chun Peng, Chieh-Cheng Chen,“Effects of Ga Concentration on Electronic and Optical Properties of Ga-doped ZnO from First Principles Calculations”, Optical Materials, 35 (2013) 509-515.
  55. Hsuan-Chung Wu, Yu-Siang Lin, Syuan-Wei Lin,“Mechanism of Visible Light Photocatalysis in N-doped Anatase TiO2 with Oxygen Vacancies from GGA + U Calculations”, International Journal of Photoenergy, 2013 (2013) Article ID 289328, 7 pages.
  56. C. S. Wu, D. L. Young, H. C. Wu,“Simulations of multidimensional interfacial flows by an improved volume-of-fluid method”, International Journal of Heat and Mass Transfer, 60 (2013) 739–755.
  57. Kun-Cheng Peng, Yi-Chung Lin, Shiu-Jen Liu, Keng-Lin Hsieh, Chiun-An Tseng, and Jing-Chie Lin,“Green Fluorescence of Mn-Doped Zn2SiO4 Thin Film Enhanced by Surface Plasmon of Nano-Silver Coating”, Japanese Journal of Applied Physics, 52 (2013) 01AC02.
  58. Jing-Chie Lin, Jing-Nan Wu, Chun-An Tseng, and Kun-Cheng Peng,“Effect of Direct Current Power to Ti-Target on the Composition, Structure and Characterization of the Ti (0–2.36 at. %), Al Codoped ZnO Sputtering Thin Films”, Japanese Journal of Applied Physics, 52 (2013) 01AC06.
  59. Liao Shu-Chuan, Chen Ko-Shao, Chen Wei-Yu , Chou Chin-Yen, Kan Chi Wai, “ Surface Graft Polymerization of Acrylamide onto Plasma Activated Nylon Microfiber Artificial Leather for Improving Dyeing Properties” , Journal of Chemical Engineering and Applications, 4 (2) (2013) 78-81. (http://www.ijcea.org/index.php?m=content&c=index&a=show&catid=46&id=555)
  60. Tsui-Hsun Wu, Shu-Chuan Liao, Ying-Fang Chen, Yi-You Huang, Yi-Syuan Wei, Shu-Ju Tu, Ko-Shao Chen,” Determination of functionalized gold nanoparticles incorporated in hydrophilic and hydrophobic microenvironments by surface modification of quartz crystal microbalance”, Journal of Applied Surface Science, 274 (2013) 418–424.